If the car's pull rod ball joint is broken, it will cause the steering wheel shaking, brake deviation, and direction failure. In serious cases, it may also cause the wheel to roll off instantly due to the ball joint falling off. The consequences are serious. It is recommended to replace it in time. The ball head of the pull rod is a pull rod with a ball head shell. The ball head of the steering spindle is placed in the ball head shell. The ball head is hinged with the edge of the shaft hole of the ball head shell through the ball head seat at the front end. The needle between the ball head seat and the steering spindle is embedded in the groove of the inner hole surface of the ball head seat, which has the characteristics of reducing the wear of the ball head and improving the tensile strength of the spindle. Next, Zhejiang Aslan Auto Parts Co., Ltd. will give you a detailed introduction about the knowledge of automobile rod ball joint. If you want to know more information, please continue to pay attention to the electric bond. The symptom that pull rod ball head broke basically has a few kinds of circumstance below? 1. If the front wheel ball joint is broken, the following symptoms will appear a. Bumpy road section, clattering; b. The car is unstable, swinging left and right; c. Brake deviation; d. Direction failure. 3. The ball head is easy to break when it is subjected to impact load due to too large clearance. Repair as soon as possible to avoid danger. 3. The outer ball joint refers to the hand pull rod ball joint, and the inner ball joint refers to the steering machine pull rod ball joint. The outer ball and the inner ball are not connected together. They have to work together. The ball head of the steering machine is connected to the sheep horn, and the ball head of the hand pull rod is connected to the parallel rod. 4. If the ball joint of the steering tie rod is loose, it will lead to the steering deviation, tire eating and steering wheel shaking. If it is serious, it may also cause the ball joint to fall off and the wheel to fall off instantly. It is suggested that it should be replaced in time to avoid potential safety hazards OK, let's introduce Zhejiang Aslan Auto Parts Co., Ltd. to the knowledge of automobile ball joint. If you know something about automobile ball joint, you can continue to pay attention to Zhejiang Aslan Auto Parts Co., Ltd. |
>> Return to the previous one |
- About Us
- Company Profile
- Culture
- Equimpent
- Certificate
- Location
- Products
- All products
- Contact us
- Contact Aslan
- Contact us
- +86-576-87228575Hotline
- 12782671@qq.comTell us the problem